13 March 2019
 Categories: , Blog

The cost of using an electrical hot water system can be high. This is particularly true if you are dealing with an old and outdated appliance. Therefore, if you have been struggling with high electrical bills, you should consider reducing your long-term costs by installing an energy-efficient model. Most modern heaters are designed to consume less electrical power while maintaining the best water heating standards. If replacing your hot water system is not a viable option, use the tips below to improve overall energy efficiency.

Conduct Repairs

You should plan on conducting comprehensive repair on your electrical water heater. Often, the energy losses can be attributed to the degradation of the system. In general, you should begin by checking the appliance for signs of damage. Inspect both the electrical and plumbing elements for the best results. If the electrical connections are faulty, you should think about rewiring the hot water set-up for safety and efficiency. In addition, you must repair plumbing elements like pipes, tanks and insulation. You can contact a hot water repairs contractor for help.

Clean the Tank

Cleaning the tank is a simple process, but it might be instrumental in improving your water heater's energy efficiency. In most cases, old hot water tanks will lose their efficiency due to the accumulation of sediments in the container. The sediments are formed due to impurities in the water and as a result of the corrosion of the sacrificial anode installed in the tank. If these fine particles build up, there will be difficulties in heating. More electrical power will be required to heat up the water due to the accumulated mess. Therefore, you should open up the drainage outlet and eliminate the sediments to promote better electrical function.

Use a Timer

You should consider installing a timer in your home to control the operation of the hot water system. In general, a lot of electrical power is wasted due to the constant operation of the heater. Simply speaking, most people keep their heater on consistently for the convenient availability of hot water. This practice causes the increase in electrical bills and increases the rate of appliance wear. If you install a timer, you can control the operation of the hot water system. For instance, you can turn off the heater when nobody is at home and have it turn on just before coming back. Also, if you are in an area that has peak hour electrical charges, you can have the heater switch off during these periods for optimal efficiency.